DISTRIBUTOR INSTALL: Tech TIP

Fig. 3.1.2

 To Install a Distributor:

 Transfer the position of the Number 1 plug wire post on the cap down to the Distributor base "A" as shown in FIg. 3.1.1.

  Remove the Cap and Rotate the rotor in the Distributor to the Install Position "B":

  "C" = 1-11/16-inch Standard Distributor

  "C" = 2-1/4-inch HEI Distributor

  As the Distributor is installed with the rotor pointing to "B" it will rotate back to "A" as the drive gear engages with the cam gear and you should have the rotor pointing back to its original position.

Firing Order:

 1 - 8 - 4 - 3 - 6 - 5 - 7 - 2

Back To [1] DISTRIBUTOR

HOME - HEADS INDEX - BLOCK INDEX - SPECIFICATIONS