INTAKE MANIFOLD TORQUE SEQUENCE:

Fig. 3.7.1

 

 

BOLTS

TORQUE

 LUBE

12 -  3/8" 16 NC x 1-1/4"

30 Lb/Ft

Sealant

NOTE: I suggest you torque them down at least 2 times. I have gone over them and the third time I would find a couple of the bolts were not to Spec yet. The center usually takes more to get it to lay flat on the heads.

WARNING: Be careful when tightening down the ones on the ends. (# 6,8,10,12) They have been know to break.

Back To [7] INTAKE MANIFOLD

HOME - HEADS INDEX - BLOCK INDEX - SPECIFICATIONS